3/4" Pipe Nipples

 CLICK HERE for all Pipe Nipple Fittings

• Description:
• ● A 3/4" pipe nipple is a short section of 3/4" pipe with 3/4" male threads on either end.
• ● It has a unthreaded section of pipe between the male NPT threads.
• Used for:
• ● A 3/4" pipe nipple is used to connect two 3/4" female threaded fittings, pipes or components together.
• ● Also used to connect a 3/4" section of pipe to 3/4" female threaded fittings or components.
• ● Often used to extend a 3/4" pipe run.
• Advantage:
• ● The advantage of a 3/4" pipe nipple over a close nipple is that it has a section of unthreaded pipe between the threads.
• ● This unthreaded section of pipe allows for pipe nipples to be available in various lengths to better suit specific projects.
• To Install:
• ● Thread one of the 3/4" male pipe threads into a female thread of the same size.
• ● Start by threading the nipple into a fitting by hand, using Teflon tape or pipe sealant as required.
• ● Then thread it into the second fitting and tighten by hand or by wrench if needed.
• Sizing:
• ● A pipe nipple is first sized according to the size of the thread it will connect to.
• ● And then it is sized length of the nipple.
• ● For Example: a 3/4" x 4" pipe nipple is a 3/8" threaded nipple that is 4" long.
• Also Called:
• ● 3/4" NPT Nipple.
• ● 3/4" Barrel Nipple.
• ● 3/4" Tube Nipples.
• More Options:
• ● Another option is a Close Nipple which is also a NPT nipple but without a unthreaded section of pipe between the threaded ends.
• ● Another option is a Hex Nipple which is also a threaded nipple fitting but it has a hexagon nut shaped head between the threaded ends.
• ● Scroll down to "Related Products" for more 3/4" stainless steel nipple fittings. 
• Material of Construction:
• ● These threaded pipe nipples are constructed out of Stainless Steel 304.

More Information:

 A 3/4” pipe nipple is a short section of 3/4” pipe used in gas handling, fluid transfer and in plumbing systems to connect two 3/4” female threaded components or to extend 3/4” pipe run. Sometimes called nipple tubes or barrel nipples, they are also used to add a section of 3/4 inch pipe to a fitting or component. It differs from a close nipple in that it has a section of unthreaded pipe between the threads. This characteristic feature of a specific length of unthreaded pipe between the threads enables nipple pipe to come in a selection of different lengths. This makes them ideal to situations that may involve adding a particular length of 3/4” pipe to an application. Another benefit of this feature a specific pipe length is that this threaded nipple can be connect fittings or components at a specific distance apart. The 3/4” male threads of this plumbing pipe nipple will thread into female threads of the same size. This NPT nipple for plumbing has National Pipe Threads often referred to as NPT threads, which are tapered and form a secure water-proof connection when properly installed. This makes stainless pipe nipple fittings ideal for a wide range of industrial applications including in gas, fluid transfer and plumbing  applications, wherever two 3/4” female threaded parts need to be securely connected at a specific distance or where a 3/4” pipe run needs to be extended. These nipple pipe connectors are manufactured out of stainless steel 304, making them durable, corrosion and rust resistant.    

Dimensions:

Specifications: