3 Way Ball Valves
In stock
SKU
3 way Stainless Steel Ball Valve
Size | 1/2" to 2" |
---|---|
Material | Stainless Steel 316 |
Handles | Stainless Steel 304 |
Temperature Rating | -13°F to 302°F |
Seal | Teflon (PTFE) |
Thread | Female NPT |
Working Pressure | 1000 PSI |
3 Way Stainless Steel Ball Valves are a good way to divert or mix flow with only one valve instead of two and a Tee Fitting. The L-Type design allows for a center in port, and a simple swing of the ball valve to switch ports. (It can shut off all flow) The T-Type design can do this as well and also allow the opposing ports to open straight through. It can also do all 3 ports open at once. (It cannot shut off all flow)
- Advantages:
- ● Can divert or mix flow without the need of a Tee Fittings and two separate ball valves
- Consideration:
- ● Reduced Port, ID is one size smaller.
Features:
- ● Suitable Mediums: Water, Oil, Gas (WOG)
- ● Threads: Female NPT
- ● Seal: PTFE (Teflon)
- ● Port: Reduced Port
- ● Handle: Blow-Out Proof
- ● Locking Device: Handle Can be locked open or closed (remove-able)
- ● Pressure: 1000 PSI (6.4MPa)
- ● Temperature: -13°F to 302°F
3-Way Ball Valve Dimensions:
- ● Since these are made from One-Piece with three caps attached to each port end, they cannot accept as large a ball as the 2 & 3 Piece can.
- ● This makes their internal diameter (ID) smaller than the full port, however they are not as reduced as the one piece standard port is.
3 Way Ball Valve Material List:
- ● All Wetted parts touching the material being transported are manufactured form long lasting Stainless Steel 316.
- ● The Seal & Seats are made out of Teflon (PTFE). This makes these robust 3-Way valves high temperature and chemical resistant.
Specifications:
Size | 1/2" to 2" |
---|---|
Material | Stainless Steel 316 |
Handles | Stainless Steel 304 |
Temperature Rating | -13°F to 302°F |
Seal | Teflon (PTFE) |
Thread | Female NPT |
Working Pressure | 1000 PSI |
Write Your Own Review
Categories
Expand